Biolab

The ICN2 Biolab is a transversal facility that offers scientific advice and practical training in the field of Cell Biology, Microbiology and Molecular Biology, as well as technical support to carry out basic and applied research activities in organisms. living (cells / cell lines, microorganisms). ), potentially infectious material (blood, tissues, body fluids, clinical samples) and other biological material (proteins, nucleic acids, microbial toxins). Its central goal is to facilitate the research of the interface of nanotechnology and life sciences in a successful and safe manner. ICN2 Biolab is a level 2 biosafety laboratory (BSL-2). The specific support offered by the Biolab Facility includes:

  • Access to BSL-2 laboratory and instrumentation.

  • Assistance, technical supervision and training of users to ensure the correct and safe use of available equipment.

  • Scientific and technical management, consultation and support in experimental design, implementation and analysis.

  • Technical and basic instruction (practical training) in experimentation with cell and tissue cultures, and in techniques of molecular biology and microbiology.

  • Carrying out experimental procedures by the technical staff of the installation.

  • Development of protocols, guidelines, operating procedures, reports and management of required mandatory documentation.

  • Assistance in administrative tasks related to legal aspects of biosafety and biosecurity.

  • General maintenance of the laboratory, including cleaning procedures, waste disposal, sterilization and disinfection and supply of supplies (disposable laboratory equipment, consumables and sterile solutions, etc.)

The Biolab installation aims to be flexible and open to (temporary) changes in the short or long term. All researchers can discuss possible adaptations of the Biolab with the facility leader who will try to address special needs and arrangements.

Facility

Images

Microbiology space

Microbiology space

Telstar BIO II A

The Telstar BIO II A is a Class II (Type A2) Biological Safety Cabinet designed for microbiological research with biological agents (e.g. bacteria, viruses, etc.) and allergens of risk levels 1, 2 and 3. It ensures the highest level of protection for operator, product and environment. This cabinet has been designed according EN 12469 and is meeting or exceeding requirements of NSF 49, BS 5726, NFX 44-201 and DIN 12950. Each cabinet is factory-certified by TÜV-GS registered laboratory to meet the specified performance requirements.

Fisherbrand cell density meter

The Fisherbrand Cell Density Meter is a robust, easy to use instrument dedicated to the measuring of the density of cells in suspension such as E.coli, yeast, cells and other cell cultures.

General features

  • Single beam LED cell density meter measures OD at 600nm.

  • Small, portable, with rechargeable battery.

  • Long lifetime LED source with little maintenance needed.

  • Easy to use, clean and sterilize.

  • Results are given in Absorbance Units (OD).

  • Stores up to 99 results to download later.

Incubator Forma Series II Water Jacket

The Incubator Forma Series II Water Jacket is used in the Biolab Facility for the cultivation of organisms or samples that don’t need CO2 supply, such as bacterial cultures and fungal cultures. The incubator provides an environment with controlled temperature and elevated humidity.

General features

  • Polished stainless steel interior

  • In-chamber HEPA air filtration system

  • Heating: The temperature of the work chamber can be regulated within a range of 10°C to 50°C.

  • Water Jacket Technology: Maximum thermal stability and quick recovery are assured with the unique triple wall construction, providing superior protection against temperature loss in the event of an unexpected power outage.

  • Humidification: The atmosphere in the work chamber is humidified through the evaporation of water held in a basin at the bottom of the inner casing.

Microwave ProClean 310

Technical data Voltage: 230 V, 50 Hz Power levels: 6 Max. power: 700 W Dimensions: 44.5 x 35.5 x 25.5 cm



Heraeus Biofuge pico

The Heraeus Biofuge pico is an ultracentrifuge with a fixed-angle rotor for 24 x 1,5 / 2 ml microcentrifuge tubes, max. speed 13000 rpm.

Orbital shaker Stuart Mini SSM1

The compact orbital shaker Stuart Mini SSM1 provides a smooth uniform circular motion with an orbit of 16 mm. It is supplied with a non-slip mat that can hold up to four multi-well plates or diagnostic cards. The shaking action is ideal for samples of 0.5 to 5 ml held in multi well plates, dishes and Petri dishes. The shaker can be used in incubators and environmental chambers (up to 40°C and 80% humidity). Speed is variable from 30 to 300 rpm. Once set on the digital display, the shaking speed is effectively maintained even over long periods of time. Shaking times can be set to run for 1 to 999 minutes on the built-in digital timer, or the unit can be set for continuous operation.

General features

  • Smooth orbital shaking action

  • Orbit of 16 mm is ideal for larger samples, for example multi well plates

  • Built-in digital timer

  • Variable speed control to 300 rpm

  • Supplied with non-slip mat for multi-well plates etc.

  • Optional accessory cradle system for flasks and bottles

Orbital platform shaker PSU-10i

The orbital flatbed shaker PSU-10i, with LCD display of speed and time, is placed inside the microbiological incubator. Available with a choice of four interchangeable accessory platforms, to enable use with a wide range of vessels, including bottles, flasks and beakers, dishes, boxes and Petri dishes. An audible signal accompanies automatic switch-off to indicate the completion of a set time period. The soft start feature ensures a smooth ramp up of the shaking speed.

General features

  • Variable speed control.

  • Continuous or timer operation from 1 min to 96 h with automatic switch-off.

  • Can be used at 4 to 40 °C, in an incubator or cold room.

  • Low voltage power supply enables safe cold room operation.

Additional equipment

  • Fridge, 4°C

Cell culture space

Cell culture space

Biological safety cabinet HERAsafe HS12*

The HERAsafe HS12 is a Class II (Type A2) Biological Safety Cabinet especially designed for work with dangerous biological substances of risk levels 1, 2 and 3. It ensures high product and personal/operator protection from contamination. This cabinet has been safety tested in accordance with NSF 49, BS 5726, NFX 44-201, IEC 1010-1 and DIN 12950.

General features

  • Vertical laminar air flow and air intake (air curtain) across front opening

  • Modular design for flexible, individually orientated use

  • Motor-driven front window: Optimum protection through hermetically sealing, aerosol tight lock

  • Permanent monitoring of all relevant safety functions via monitor control system

  • Equipped with a High Efficiency Particle Air Filter (HEPA) H 14 which guarantees a minimum absorption of 99.999% on 0.3 µm particles

Vertical Laminar Flow Bench Telstar AV-100*

The Telstar AV-100 Vertical Laminar Flow Bench, with 1 HEPA filter for down flow, allows operation in sterile and particle-free conditions due to the continuous flushing of the working area by a unidirectional vertical and ultra-filtered air flow, thus assuring full product protection (only product, not operator). It is specially designed for handling of non-pathogenic biological samples, cell and tissue cultures, controls in microbiology, pharmaceutical products preparation, electronics, optics and more.

General features

  • Supplied with working area CLASS 10 as defined by U.S. Fed. Std. 209 a B.S. 5295

  • Specially designed for handling of non-pathogenic biological samples, cell and tissue cultures, controls in microbiology, pharmaceutical products preparation, electronics, optics and more

  • Cabinets made of stove-enamel coated steel

  • Modern and accurate design makes it possible to change the filters from inside the cabinet, having reduced external dimensions with suitable working area

  • Polished stainless steel working surface divided into three parts for easy removal for sterilizing

  • Removable side walls and front window with gas springs, both made of UV resistant tempered glass

  • Materials and construction according to international standards, with high quality components and easy service

  • Digital control board with LCD display including selection of air speed, button for UV irradiation, indicative LEDS for air speed, lighting, UV clogging and more, alarm LED and air speed adjustment

  • ON/OFF selector

  • Electrical power socket inside of the cabinet

CO2 incubator HERAcell

The HERAcell CO2 incubator is used for the cultivation of cell and tissue cultures and simulates the physiological environment of these cultures. The unit provides an environment with controlled temperature, CO2, elevated humidity and automatic decontamination mode.

General features

The test chamber atmosphere can be regulated with respect to its temperature and CO2 concentration. The evaporation of water from the water reservoir creates a high and constant relative humidity.

  • Heating: An air jacket heating systems allows the test chamber temperature to be adjusted from +3°C to 55°C.

  • Gas supply: The CO2 content of the test chamber atmosphere can be adjusted within a range from 0 - 20 %.

  • A stainless steel fan wheel circulates and mixes the test chamber atmosphere.

  • Sensor block contains sensors for temperature, gas flow regulation, and temperature monitoring. These sensors monitor the conditions in the test chamber and pass this information to the control system.

  • Humidification of the test chamber atmosphere is accomplished by the evaporation of water from the open water reservoir included in the test chamber floor. At 37°C, the test chamber reaches a relative humidity of approx. 95 %, and minimal humidity recovery times are achieved.

  • ContraCon Decontamination Routine: decontamination of the entire test chamber with all interior fittings and sensors. During the decontamination routine, the unit is disinfected for 9 hours with moist heat at 90 °C. The entire decontamination routine takes approximately 25 hours to complete.

CO2 incubator Function line BB16CO2 incubator Function line BB16

The CO2 incubator Function line BB16 is used for the cultivation of cell and tissue cultures and simulates the physiological environment of these cultures. The unit provides an environment with controlled temperature, CO2 and elevated humidity.

General features

The test chamber atmosphere can be regulated with respect to its temperature and CO2 concentration. The evaporation of water from the water reservoir creates a high and constant relative humidity.

  • The inner casing and fittings are made of copper.

  • Heating: The temperature of the work chamber can be regulated within a range starting at +6°C above room temperature up to 50°C.

  • Gas supply: The CO2 saturation of the atmosphere in the work chamber can be regulated within the range of 0 % to 20 %.

  • A stainless steel fan wheel circulates and mixes the test chamber atmosphere.

  • Humidification: The atmosphere in the work chamber is humidified through the evaporation of water held in a basin at the bottom of the inner casing. A relative humidity of up to 95 % can be reached, depending on the temperature existing in the work chamber.

Cryogenic tank

The MVE XC 20 Millennium (outside of the Biolab, hallway) is a cryogenic tank used for the long-term storage of frozen cell lines at the vapor phase of liquid nitrogen (between -140°C and -180°C). It has a capacity of up to 210 vials.

General features

  • Durable, tamper-proof lid design.

  • High strength neck tube reduces liquid nitrogen loss.

  • Strong, lightweight aluminium construction.

  • Advanced chemical vacuum retention system.

  • Spider design on platform for easy retrieval and insertion of product canisters.

  • Liquid nitrogen reservoir.

Microcentrifuge Eppendorf 5415C

The Eppendorf Centrifuge Micro 5415C is an Ultracentrifuge with a fixed-angle rotor for 18 x 1,5 / 2 ml microcentrifuge tubes, max. speed 14000 rpm.

Optical microscope Zeiss Telaval 31

The TELAVAL 31 is an inverted transmitted light microscope to carry out basic visual analysis on cell and tissue cultures in culture flasks, dishes and plates.

General features

  • Fixed Köhler lighting with a numeric aperture of 0.4 and an operating distance of 55mm

  • Bright field overview lighting for large specimen fields and for receptacle heights up to 175mm

  • Light source: halogen lamp S 5 A 6 V 25 W

  • Eyepiece: 10x

  • Objective lenses: 10x, 20x

The ICN2 also has in its Research Support Facilities the following optical microscopes that can be useful for users of the Biolab Facility:

  • Axio Observer Z1m optical microscope (ZEISS), a high resolution inverted microscope that can be used for epifluorescence, transmitted and reflected light illumination, bright field, dark field, phase contrast, differential interference contrast (DIC) etc.  read more 

  • Eclipse LV100DA optical microscope (Nikon), an upright microscope that can be used for reflected light illumination (brightfield, darkfield, or polarized observations) and transmitted light illumination (brightfield and polarized observation).  read more 

VACUSIP Aspiration System

The VACUSIP Aspiration System is a portable compact aspiration system for convenient and affordable liquid waste disposal. Integra Biosciences™ VACUSIP™ Aspiration System is designed with an integrated silent vacuum pump.

General features

  • Reliable and silent pump, enabling it to operate independently from an external vacuum source.

  • Unique hand operator allows for a fine regulation of the liquid flow and can be connected to various adapters.

  • Changing a filled collection bottle is clean and convenient. Simply unscrew the lid and attach an empty glass bottle or a plastic bottle for direct disposal.

  • To keep the workspace clean and organized, the hand operator can be placed in the integrated holder.

  • Silicone hand operator allows regulation of the liquid flow by applying varying finger pressure.

  • Different adapters are available to match a multitude of laboratory containers.

  • A hydrophobic filter protects the unit from damage and contamination by aerosols and liquids.

  • For easy decontamination, all parts that come in contact with liquids can be autoclaved.

Water bath Grant mini

The Grant water bath is an unstirred 5l water bath with stainless steel tank used at 37°C for cell culture media preparation

Additional equipment

  • Fridge Liebherr Medline, 4°C

Shared equipment

Shared equipment

Autoclave Selecta Med20 (outside of the Biolab, room 2001)

The Selecta Med20 is a semiautomatic 20 l vertical top-loading autoclave that allows sterilization of solids without packaging and liquids such as culture media.

General features

  • Pressure regulator thermostat of 1 and 2 bar

  • Temperatures 121°C and 134°C

  • AISI 304 stainless steel external case and top

  • Stainless steel chamber and lid, with easy opening

  • INCOLOY special stainless steel heater element, which provides long life, low corrosion and high temperatures resistance

  • Automatic atmospheric purge

  • Safety device to prevent lid opening

Autoclave Autester ST DRY-PV-B18

The Autester ST DRY-PV-B18 is an 18 l horizontal bench-top class B autoclave that allows sterilization of different types of material:

  • Solid load resistant to temperature: instrumental, metallic

  • Solid load sensitive to temperature: plastics

  • Solid packed load

  • Porous load: textiles

  • Wrapped porous load

This autoclave is not suitable for sterilizing liquids.

To ensure proper sterilization, Autester ST DRY PV autoclaves achieve a complete air removal and a better steam penetration thanks to an efficient system of fractionated vacuum.

General features

  • Sterilization chamber and cover in stainless steel

  • External epoxy coated case

  • External steam generator to the sterilization chamber

  • Operations digital control

  • Specific programs for testing and autoclave diagnosis

  • Large backlight LCD display

  • Air inlet filter to the camera

  • Water tank

  • RS-232 output for PC or printer connection

Centrifuge SIGMA 2-16PK

The SIGMA 2-16PK is a universal refrigerated microprocessor-controlled table top centrifuge. The following rotors are available in the Biolab: 12148 (for microcentrifuge tubes) and 12072 (for 15 ml tubes).

General features

The microprocessor-controlled electronic system ensures a wide range of adaptations of the centrifuge for various tasks. The following parameters can be set:

  • Speed in steps of 1 or 100 rpm

  • Relative centrifugal force RCF in steps of 1 or 10g

  • Time between 10sec and 11h 59min max.

  • Continuous run

  • Short run

  • Rotor preselection

  • Temperature range from – 10°C to + 40°C in steps of 1°C

  • Acceleration and deceleration curves

Rotor 12148

Angle rotor for 24 x 1.5 - 2.2 ml microcentrifuge tubes, with hermetic aluminium lid, max. radius 8.2 cm, min. radius 5 cm, angle 45°, max. speed (min-1) 15300, max. gravitational field (xg) 21460.

Rotor 12072

Angle rotor for 20 x 15 ml round or conical tubes, max. ∅ 17 x 120 mm, culture tubes 15 ml, falcon tubes 15 ml, max. radius 13.9 cm, min. radius 8 cm, angle 33°, max. speed (min-1) 4000, max. gravitational field (x g) 2486.

Dry bath

The Fisherbrand Isotemp Digital Dry Bath offers a range of configurations with interchangeable modular blocks for a variety of application needs. Designed for basic to advanced applications with a maximum temperature of 130°C, a timer and currently 2 block sizes: one for 1.5 ml eppendorf tubes, one for 2.0 ml eppendorf tubes.

General features

  • Digital controls and display of time and temperature.

  • Advanced internal temperature sensing probe for outstanding temperature accuracy and control.

  • Precise temperature control with PID circuit.

  • Temperature calibration enables to offset the temperature to desired value.

  • Timer allows the user to accurately monitor the heating time.

  • Wide range of interchangeable aluminium alloy heat blocks provide versatility and allow for easy cleaning and disinfecting.

  • Powder-coated steel body construction ensures durability.

  • Built-in over-temperature protection device warrants sample and user safety.

  • Temperature deviation adjustment.

Osmometer OSMOMAT 030

The OSMOMAT 030 is an automatic cryoscopic osmometer that measures the freezing point depression to determine the total osmolality of aqueous solutions.

General features

  • Automatic calibration: no manual adjustment of a potentiometer is required

  • No ice formation in the lower cooling system: reliable measurements even for long working periods

  • Measuring time approx. one minute: valuable in case of serial measurements

  • Automatic measuring: simple operation

  • Minimum sample volume: 50 µl standard

  • Disposable plastic measuring vessels

  • Air cooling: no water supply needed, electronic wall-socket suffices

  • Latest electronic engineering: microprocessor controlled, automatic determination, display and storage of the result

  • The upper front panel is clearly arranged with foil keyboard and easy-to-read digital display

  • Automatic error-detection: display shows clear error messages

  • Compact and modular construction: permitting fast and simple servicing

Ultrasonic bath

Ultrasonic bath with heater and timer. Digital screen that shows temperature and timing. Temperature control (adjustable from RT to 80ºC). Timer: 0-30 min. Frequency: 40 kHz.

Additional equipment

  • Freezer Liebherr Öko super, -20°C

  • Digital Vortex Mixer

  • Ultra-freezer HEF U410, -86°C (outside of the Biolab, room 2001)

Provisional Contacts

Manuela Dietrich |  manuela.dietrich@icn2.cat  | 937 375 715 |  ORCID 

Manuela Dietrich |  manuela.dietrich@icn2.cat  | 937 375 715 |  ORCID 

Gustavo Ceballos | Head of Research Support Division - Instrumentation Unit |  gustavo.ceballos@icn2.cat  |  ORCID 

CERCA Institutes

Owners

Centres CERCA List

Equipments & Services Offered

The Biolab is a designated Biosafety Level 2 (BSL-2) laboratory of 36 m2, distributed between the laboratory and a decontamination transfer chamber (Safety Access System, SAS). Access to the Biolab is separated from the free-movement corridor by the SAS room where staff must leave street clothes and personal belongings and put on available clothing and protective equipment (PPE). The transfer chamber has an interlocking security system that prevents the simultaneous opening of the interior and exterior doors, and access is restricted to personnel authorized by fingerprint. The installation has been designed in accordance with the UNE-EN 12128 standard with suitable materials and construction that guarantee adequate containment and robustness. The ventilation system is designed to generate negative pressure in both the working laboratory and the SAS and consists of a 50W fan that drives air through H5 and M14 type filters. The extraction system consists of a 450W fan with an EC motor and a HEPA filter type H14. The laboratory is equipped with an O2 detector (measuring range 0% – 5% Vol) and a CO2 detector (measuring range 0% – 25% Vol), both mounted on the surface, including a control unit with alarm. The Biolab facility has two disinfection systems for regular and emergency decontamination of the laboratory: one based on UV lamps equipped with germicidal emitter, and another decontamination system with hydrogen peroxide (HPV). The laboratory has two different areas each with its own equipment, one dedicated to working with microorganisms (bacteria, viruses, parasites, fungi) and one dedicated to the work of cell culture. It is located in the 2091 and 2093 laboratory spaces on the second floor of the main ICN2 building. EQUIPAMENT The entire Biolab facility equipment can be used for self-service after a brief introduction by the facility leader. In order to minimize the risk of cross-contamination between the different areas within the Biolab, each space has its own equipment. Only a few facilities are shared between users of both spaces. MICROBIOLOGY SPACE Biological safety cabinet Telstar BIO II A * Incubator Form Series II Water Jacket Microcentrifuge Heraeus Biofuge peak Stuart Mini SSM1 orbital shaker ProClean Microwave 310 Refrigerator, 4 ° C CELL CULTIVATION AREA Biological safety cabinet HERAsafe HS12 * Telstar AV-100 vertical laminar flow bench * HERAcell CO2 incubator CO2 incubator Function line BB16 Eppendorf 5415C microcentrifuge Zeiss Telaval Optical Microscope 31 Mary Grant mini bathroom Refrigerator Liebherr Medline, 4 ° C SHARED EQUIPMENT SIGMA 2-16PK centrifuge Autoclave Autester ST DRY-PV-B18 Osmometer OSMOMAT 030 Liebherr Öko super freezer, -20 ° C Digital vortex mixer Autoclave Selecta Med20 (outside the Biolab, room 2001) * Freezer HEF U410, -86 ° C (outside the Biolab, room 2001) * This equipment must be booked using the IMS online booking system available on the ICN2 intranet.

Categorització

RIS3CAT domains & other

RIS3CAT Domains

CERCA GINYS Categories

GINYS-ICN2-007

Access procedure & Fares

Open Hours: The reception is open Monday to Friday from 09:00 until 17:00